Using-Altium.md

@@ -93,11 +93,10 @@ Once you have all your components on the schematic, you can connect them using t
     Sometimes you need to have routes that are the same length to preserve the signal that passes through it.
 
 To do this:
-    
     - In your schematic file, click Place, highlight over Directives, and select Differential Pair.
     - Click on the two wires you want to be a differential pair - have the same length - this will leave a little red symbol on each of them.
     - Click on the red icons and make sure the labels are the same as each other
-     ###Rename the two wires with nets so they have the same name (probably just the label name) with one having an underscore N and the other with an underscore P (for negative and positive) Ex. RF_N and RF_P
+    ###Rename the two wires with nets so they have the same name (probably just the label name) with one having an underscore N and the other with an underscore P (for negative and positive) Ex. RF_N and RF_P
     - Save the schematic, open the PCB file, and import the changes
     - Change the routing option to Interactive Differential Pair Routing (You can change this through the 
     - Workspace Ribbon or through the Route button at the top