| ... | ... | @@ -36,7 +36,7 @@ Once you have all your components on the schematic, you can connect them using t |
|
|
|
<details><summary>Steps for PCB Document:</summary>
|
|
|
|
|
|
|
|
1. Once your schematic is finished, switch to the PCB document. In this document, there are three different ways to view the board.
|
|
|
|
- If you type the number “1”, you will be able to edit the board shape
|
|
|
|
- If you type the number “1”, you will be able to edit the board shape with options under Design
|
|
|
|
- If you type 2 - this is where you will be routing and moving components around - the majority of your work will be done here for the PCB. In this setting, the board is black and the components will likely be colorful.
|
|
|
|
- If you type 3, you will be able to see your board in the 3d view.
|
|
|
|
|
| ... | ... | |
