| ... | ... | @@ -143,4 +143,24 @@ To make a new symbol: |
|
|
|
1. Change the Grid to whatever you want, somewhat often, but not all over the place - maybe like 30 mil.
|
|
|
|
1. You can also adjust the size of the holes - Diameter 25mil and hole size 15mil is a good size.
|
|
|
|
|
|
|
|
</details>
|
|
|
|
|
|
|
|
<details><summary>Tips and Tricks:</summary>
|
|
|
|
- To find a library that you've opened, click on the bottom left - SCH Library
|
|
|
|
- Push space while dragging a component or net label to make it rotate.
|
|
|
|
- When saving things, the little red file symbol on the left in the projects panel turns gray.
|
|
|
|
- Navigating 3d mode:
|
|
|
|
- Hold down shift and drag with right click to rotate the board to view from different angles
|
|
|
|
- Click 0 to orient the board horizontally (rotated 0 degrees)
|
|
|
|
- Click 9 to orient the board vertically (rotated 90 degrees)
|
|
|
|
- Click 8 to orient the board from the house view.
|
|
|
|
- Changing the size of the grid - Type “g” to change the grid size
|
|
|
|
- Switch between measurement units - type “q”. We prefer mil (1000th of an inch) over mm.
|
|
|
|
- You can see which one you’re currently using by looking to the bottom left where it describes the grid and the dimensions and units.
|
|
|
|
- You can keyboard shortcut into the menus and options by typing the underlined letter
|
|
|
|
- Ctrl + scroll in and out to zoom in and out
|
|
|
|
- Right click drag to move the board around
|
|
|
|
- To measure - Ctrl m
|
|
|
|
- To clear measurements - Shift c
|
|
|
|
|
|
|
|
</details> |
|
|
\ No newline at end of file |
